Conversion Chart For American Wire Gauge To Metric System
Introduction
When it comes to electrical wiring, the American Wire Gauge (AWG) and Metric System are the two most commonly used systems to measure the size of wires. However, they use different units of measurement, which can be quite confusing for many people. In this article, we will provide a conversion chart that will help you convert AWG to Metric System and vice versa.
American Wire Gauge
The American Wire Gauge (AWG) is a system that uses gauge numbers to indicate the size of wires. The higher the gauge number, the smaller the wire. For example, a 20-gauge wire is smaller than a 16-gauge wire. AWG is commonly used in North America.
Metric System
The Metric System is a decimal-based system that uses millimeters (mm) to indicate the size of wires. The larger the wire, the higher the number of millimeters. The Metric System is used worldwide, except in the United States.
Conversion Chart
Converting AWG to Metric System or vice versa can be a bit tricky, but with the help of a conversion chart, it becomes much easier. Here is a conversion chart that will help you convert AWG to Metric System:
| AWG | Diameter (mm) |
| 30 | 0.255 |
| 28 | 0.321 |
| 26 | 0.404 |
| 24 | 0.511 |
| 22 | 0.644 |
| 20 | 0.812 |
| 18 | 1.024 |
| 16 | 1.290 |
| 14 | 1.628 |
| 12 | 2.052 |
| 10 | 2.588 |
| 8 | 3.264 |
| 6 | 4.115 |
| 4 | 5.189 |
| 2 | 6.543 |
| 1 | 7.348 |
| 0 | 8.252 |
| 00 | 9.266 |
| 000 | 10.404 |
For example, if you want to convert a 16-gauge wire to the Metric System, look for 16 in the AWG column and 1.290 in the Diameter (mm) column. Therefore, a 16-gauge wire has a diameter of 1.290mm.
Conclusion
Converting AWG to Metric System or vice versa is essential for anyone who works with electrical wiring. With the help of the conversion chart provided in this article, you can easily convert the size of wires between the two systems. Always remember to use the right size of wire for your electrical project to ensure safety and functionality.